Q- How to mesure blood pressure with Bluetooth Blood Pressure Monitoring Device?

  • Step 1: Wrap cuff around your arm - Wrap the cuff comfortably tight around your arm above your elbow.
  • Step 2: Plug your device into the charging dock or press “Tele-Health” to initiate the Bluetooth to connect to the blood pressure monitor.
  • Step 3: Press the “Start” button and the blood pressure monitor will begin to take your blood pressure. Once it has finished it will display the reading and automatically send your information via the device.

Q- How to measure blood oxygen saturation (SPO2) with Bluetooth fingertip Pulse Oximeter?

  • Step 1: Place your tip of the index finger into the pulse oximeter and make sure your finger is in the correct position.
  • Step 2: Plug your device into the charging dock or press “Tele-Health” to initiate the Bluetooth to connect to the pulse oximeter.
  • Step 3: Press the “Start” button and the pulse oximeter will begin to take your SPO2. Once it has finished it will display the readings and automatically send your information via the device.


Q- How to measure body weight with the bluetooth weight measuring scale?

  • Step 1: Make sure your measuring scale is connected to your device.
  • Step 2: After your device and scale have been paired, you can transmit data to the device via Bluetooth. You will see a Bluetooth icon and a checkmark on your screen which indicates that you’re connected. 
  • Step 3: Step on a scale with bare feet. Stand still to see your weight. The scale will display your weight and, a few seconds later, your body analysis data automatically sent via the device.

 

Q- How to check your body temperature with Bluetooth Thermometer?

  • Step 1: Make sure your Bluetooth thermometer is connected to your device.
  • Step 2: After your device is paired, you can transmit data to the device via Bluetooth. You will see a Bluetooth icon and a checkmark on your screen which indicates that you’re connected. 
  • Step 3: Keep the head of the thermometer close to the forehead with the simple non-contact method, one-button operation delivers results in seconds, reducing measurement time compared to traditional methods Bluetooth automates data transfer to a connected the device.


Q- What is the Emergency Response Feature? 

Once your above readings are sent to your care team with variable recordings, they will contact you to your Emergency contact number.

        (or)


  • Step 1: Press the red emergency button on the device and hold for 2 seconds to call for help.
  • Step 2: Confirmation screen on your device after holding down the emergency button you will see a confirmation screen stating that your request has been sent. If the request did not go through, you will see a screen prompting you to call 911.

Please watch the below video about Link+